Polymer Clay - making simple canes (part 2)

The slices of cane are now placed on a piece of black clay (rolled out on the thickest setting of the clay roller), as closely as possible.

 Cling film is put over the top and the clay is smoothed out using the acrylic roller.  Putting cling film over it stops the patterns from distorting while being smoothed and joined.

 Here it is after rolling and smoothing.  Hopefully, no gaps left!

 Then it can be cut to shape using a cutter or the blades and is ready to bake.

 The next simple cane is a spiral cane.  I conditioned and rolled out a piece of black and a piece of gold on the thickest setting of the clay roller.

I cut the two piece to the same size, cutting the top and bottom edges with a bevel, so that the clay joins together smoothly.

Just roll it up!

Keep rolling!  You can see there are gaps at this stage.

 Once it is all rolled and the join is smooth, the gaps have all gone and here is the spiral cane.

 It gets rolled and reduced too.  You can make spirals with lots of different layers and colours.

 To create a pendant, I placed slices of both the canes onto a piece of black clay rolled on the thickest setting, covered it with cling film and smoothed the surface, as before.  I then used a cutter (going through the cling film as well), which pushed the pattern down the sides of the pendant.

 Here are the two pendants ready for baking.  They are on a piece of card, on a bead baking rack and then on an old baking tray.  The card stops the backs of the pieces from being shiny where they are in contact with the metal.  I bake them for 30 minutes on gas mark half - the coolest setting on my oven - but different clays will vary so check the instructions on the packet.

Polymer clay will keep for ages, providing it is kept in a plastic (Grade 5) box.  Some other grades of plastic will be melted by the clay.  Just check there is a number 5 in the triangle underneath the box and it'll be fine. Canes that have been made previously can also be stored and used in other projects - you can see some of mine above.  Scrap clay is kept to be used in other designs or as the bases of other beads - there is very little waste.  If this post has whetted your appetite for more, do go and have an internet search for polymer clay artists, as there are some amazing makers out there.  I love using polymer clay as it is very forgiving and can be used in so many different ways - the only limit seems to be the maker's imagination!



Polymer clay - making simple canes

A while ago, I said I would post about making simple canes with polymer clay and I thought I had better get on with it!  (It is quite a long post, due to the number of photos, but I'll split it into hopefully manageable chunks).  Firstly, polymer clay is a non-toxic material, made of tiny particles of PVC, pigment and a plasticizer.  It needs to be baked at a cool temperature to harden.  You can use a domestic oven to bake it in, but use a baking tray just for your clay and cover it with foil when baking to ensure the material doesn't get onto the oven.  Although it is non-toxic, you need to have tools that you keep just for clay work - don't use the same tools for cooking and clay.  Above is a basic selection of useful/essential tools.  From the top left: a clay roller (for getting lovely thin sheets of clay), an acrylic sheet (for rolling/flattening), a cutter, an acrylic roller, cutting blades (extremely sharp), and some polymer clay.  The materials are sitting on a ceramic tile which is an ideal surface to work on.

 There are lots of brands of clay out there, but I use Premo by Sculpey (ranging from around £1.95 to £2.50 for a block like the one above (about 57g).  This brand is marked into four pieces, which is helpful when you only need some of the block.

 The first thing to do is to condition the clay by rolling it in your hands and warming it up.  It will become more malleable and easier to work with. 

 How do you know when it is conditioned?  The piece above has broken into two when folded over, so is not ready yet.

 Now it's ready - it is smooth and folds nicely.

 (I changed to black clay here, so that you can see it against the background.) It is being rolled out before being put through the clay roller.

 Here it is on the thickest setting, on my roller, number 1.

 Here it is after being rolled on number 5.

When you put the clay into the roller, make sure any fold is put in first, otherwise  air bubbles could be trapped in the clay.

 A sausage of pearl clay is wrapped in a thin layer of black clay.

 It just gets rolled up and the clay is cut with a bevelled edge to join together.

 The bulls-eye cane (that's the official name of this type of cane) is rolled to reduce the size and then cut into small lengths.

 I made another cane with gold in the middle and this has the black and white canes placed around it.

 It is rolled to smooth the surface and make sure the clay is all stuck together.

 It is then reduced by rolling it with a piece of acrylic.

Then slices are cut from it and can be used to make a pendant...

Polymer clay, here I come... and macramé bracelet progress

 I am so excited as I received my polymer clay starter kit in the post today.  There is a box to keep the clay in, two acrylic sheets for shaping, sandpaper for smoothing, a roller for ... rolling, cutters, a black and a white clay block and a pack of very sharp blades. 

 I also ordered a few extras - more clay in purple and blue, some glaze to protect the work and give it a shiny finish and some rather gorgeous looking foils which are applied to the clay and then burnished, and the heat caused makes the foil stick to the clay.  I also have a 'How to' DVD and have watched a couple of the sections this evening when I got home from work.  I am hoping to have a first attempt at the weekend.

Here are my first two macramé bracelets, the one above using waxed cord and the one below using hemp cord, with a variety of wooden beads. I found the finishing off on the knots quite tricky - I used a bit of PVA glue in the hope that it would secure the ends unobtrusively.

I am unsure whether to include one of these in my blog swap, but am thinking I should make another one for that, just in case my swapper happens to see my blog and this ruins the surprise.  I need to keep going and have a go using gemstones and cord next.  I am really enjoying the challenge of learning new jewellery making skills.  Oh, and the PeaceFelt piece has been prepared, so once it is received (probably in October), I'll post a photo of that too.