If at first you don't succeed...

You may remember that I was rather excited about a new to me technique to make faux ceramic using polymer clay and liquid translucent polymer clay.  The photo above is from the faux ceramic pendant tutorial and is what inspired me.  The technique looked reasonably simple and I had the polymer clay, liquid translucent polymer clay and alcohol inks, so off I went.

Hmm, not quite what I wanted, so it was a little disappointing, but I analysed why it had not worked as well as I wanted it to.  Here are my conclusions:

1. The liquid polymer clay (Sculpey) was too thick to pool properly
2. I had applied the coloured translucent clay on all the raised areas of the images, not into the recesses, which is what I should have done (if I had looked at the tutorial more carefully in the first place, I would have realised that!)
3. I had applied the liquid clay using my finger so the application was not very precise
4. There was a matt finish, rather than a glossy one, although this could have been remedied by applying a glossy glaze

So, I decided to buy some Kato translucent liquid clay as I had seen this used on a different tutorial where it could be heated by a heat gun and gave a look of resin, so I reasoned that it would give more shine.  I also bought some Sculpey clay thinner (just in case I wanted to try again with the Sculpey liquid).  I tried again, using the Kato liquid clay.

Here is the Kato liquid clay with one drop of alcohol ink just sitting on it - the colours looked lovely already, so I felt more positive.

I stamped the patterns into the clay and then cured it. Once slightly cool, I took my time and applied the ink/clay mix into the recesses of the patterns, using a cocktail stick so that I had more control. Once I was happy with them, I cured them again and was pleased with the result - the liquid clay was glossy and did look a bit like a ceramic glaze.  This is a technique I shall return to as I would like to work on an idea using polymer clay and gemstones.

I have also been stamping on polymer clay using my Blockwallah stamps and the results have been great.  I used the StazOn ink, which smells of marzipan when you use it, and which can be used on pretty much any surface.  It worked well on polymer and gave a nice clear impression.  More stamping to come, I think, and I have been looking at some colouring pens which work well on polymer clay, so I think there will be more experimenting to come...

Cross media crafting

Well, it had to happen, didn't it?  You knew it would eventually. I said I wouldn't get into card making, but gradually I have been drawn into it in a small way. (In my defence, I have always enjoyed paper crafting.) I am not going to make that many cards (famous last words), and those I do make will be simple, but hopefully elegant. I think I am one of those people who likes to collect crafting equipment, as I certainly have quite a lot of it now, for my various crafts.

(image from http://www.scrapbook.com/articles/creative-quotes)

I have got lots of stamps, inks, embossing powders, a small and a large die cutting machine, and I have been experimenting with what I can make.

 A 'Delilah Doily' die cut.

 Embossing folders - which give a raised texture to the paper.  I really liked this bubbly one.

 Chris liked the retro feeling of this pattern.

I couldn't resist the animals and birds on this embossing folder.
However, whilst investigating online and watching tutorials and craft channels, I have been discovering that many of the media I have will work with other crafts that I enjoy.  For example, I have Blockwallah woodblocks which can be used on fabric, card and polymer clay, depending what paint or ink you use with them. I am thinking that I need to make some decorations.
I have a heat gun which can be used for embossing powders but I have also found out it can be used on Kato liquid polyclay (this is the only liquid clay which can be heated using a heat gun) to create ceramic effect polymer clay, or enamel effect polymer.

Picture and tutorial from: http://www.polymerclayweb.com/tutorials/fauxeffects/fauxceramicpendant.aspx

Picture and tutorial from: http://craftygoat.com/2013/11/how_to_make_autumn_leaf_pendan.html

I am going to try both of these effects once my liquid clay arrives.

I also have some ultralight clay which can be put through a die cutting machine once it is dry.  It can also be sculpted and remains flexible once dry, unlike polymer clay.  I haven't tried it out yet, but I need to.  

My jewellery making stash can be used to make jewellery, of course, but I can also use it in felt projects or on decorations with my polymer clay.  

I am feeling very excited about all these possibilities and will share my makes as and when ... roll on my next day at  home!