Saturday 12 November 2016

If at first you don't succeed...

You may remember that I was rather excited about a new to me technique to make faux ceramic using polymer clay and liquid translucent polymer clay.  The photo above is from the faux ceramic pendant tutorial and is what inspired me.  The technique looked reasonably simple and I had the polymer clay, liquid translucent polymer clay and alcohol inks, so off I went.
Hmm, not quite what I wanted, so it was a little disappointing, but I analysed why it had not worked as well as I wanted it to.  Here are my conclusions:
  1. The liquid polymer clay (Sculpey) was too thick to pool properly
  2. I had applied the coloured translucent clay on all the raised areas of the images, not into the recesses, which is what I should have done (if I had looked at the tutorial more carefully in the first place, I would have realised that!)
  3. I had applied the liquid clay using my finger so the application was not very precise
  4. There was a matt finish, rather than a glossy one, although this could have been remedied by applying a glossy glaze
So, I decided to buy some Kato translucent liquid clay as I had seen this used on a different tutorial where it could be heated by a heat gun and gave a look of resin, so I reasoned that it would give more shine.  I also bought some Sculpey clay thinner (just in case I wanted to try again with the Sculpey liquid).  I tried again, using the Kato liquid clay.
Here is the Kato liquid clay with one drop of alcohol ink just sitting on it - the colours looked lovely already, so I felt more positive.
I stamped the patterns into the clay and then cured it. Once slightly cool, I took my time and applied the ink/clay mix into the recesses of the patterns, using a cocktail stick so that I had more control. Once I was happy with them, I cured them again and was pleased with the result - the liquid clay was glossy and did look a bit like a ceramic glaze.  This is a technique I shall return to as I would like to work on an idea using polymer clay and gemstones.
I have also been stamping on polymer clay using my Blockwallah stamps and the results have been great.  I used the StazOn ink, which smells of marzipan when you use it, and which can be used on pretty much any surface.  It worked well on polymer and gave a nice clear impression.  More stamping to come, I think, and I have been looking at some colouring pens which work well on polymer clay, so I think there will be more experimenting to come...

8 comments:

  1. How interesting. Loved seeing your experiments and the outcomes. Very cute.
    xxx

    ReplyDelete
    Replies
    1. Thanks, Kim. Polymer clay is so versatile and the internet is a wonderful thing for showing what can be done with it. Lots more experimenting on the cards, I think.
      Best wishes
      Ellie

      Delete
  2. Love your perserverance. Smells like marzipan? Mmmm (and a much nicer scent than teen spirit).

    ReplyDelete
    Replies
    1. Thanks, EC. I do like to try techniques out - sometimes they work first time, sometimes they need a bit of thinking about. I have two boxes full of polymer clay experiments, but have learnt a lot from having a go at them.
      I'm not sure that 'Smells like Marzipan' (incidentally, isn't marzipan a great word?) would have had the same impact for Nirvana!
      Best wishes
      Ellie

      Delete
  3. These are great! Always nice to experiment creatively.

    ReplyDelete
    Replies
    1. Thanks, CT. I was pleased with the second attempt and am hoping to improve each time I try this technique. I have a faux ceramic leaping hare in mind with some gemstones at the base, perhaps...
      Best wishes
      Ellie

      Delete
  4. Haven't heard of kato, but it looks really good xx

    ReplyDelete
    Replies
    1. Thanks, Cheryl and welcome. Donna Kato is a master polymer clay artist from America who has produced her own range of polymer clay and clay products. Kato clay is really good for making canes as it is not as soft as Sculpey Premo (the one I usually use) and it doesn't distort the patterns. It does need much more conditioning prior to using though apparently. I haven't actually used Kato clay myself but I have seen it being used. However, I can certainly recommend the Kato liquid clay I used for the faux ceramic!
      Best wishes
      Ellie

      Delete